Fiber Optical Accessories
We supply 60mm,40mm and 45mm fiber optic cable protection sleeve. To ensure a fused juncture over the spliced area, most splice sleeves are best put under a heat shrink in order to reinforce their rigidity. Due to their appearance, they may be referred to as inner tube optic fiber protection sleeves. The fiber optic cable protection sleeves are used in FTTH widlely. This products is made up of cross linked polyolefin heat-shrinkable tubes, hot melt tubes and Stainless steel needle. It is specifically designed for the protection of fiber optical closure.
Share:
Industry's Most Popular Sleeve.
Length:40mm.
Diameter after heat shrinking:3.0mm.
Qty Steel Needle: 1 pcs.
Clear Outer Tube.
Pack of 100 pcs.
Specifications
1.0 x 40mm FTTH Fiber Optic Fusion Splice Protection Sleeve
Length of Tube | 40mm | Outer Tube Diameter | 3.8mm |
Inner Tube Diameter | 1.5mm | Steel Needle Diameter | 1.0mm |
After Recover Diameter | 3mm | Working Temperature | -55°C ~ + 130°C |
Tensile Strength | 20MPa | Dielectric Constant | 2.5 |
Elongation at Break | 700% | Longitudinal Change | ±5% |
Density | 0.94g/m³ | Eccentricity | 105 |
Dielectric Strength | 25kV/mm | Pack | 100pcs/pkg |
Shrinking Temperature (°C) | 110 ~ 130 | Minimum Fully Recovery Temperature | 100°C |
Inquiry