Optic Splice Closure

OPT-F105H Dome Fiber Splice Closure FOSC 48 cores
OPT-F105H Dome Fiber Splice Closure FOSC 48 cores-05
OPT-F105H Dome Fiber Splice Closure FOSC 48 cores-03
OPT-F105H Dome Fiber Splice Closure FOSC 48 cores-01
OPT-F105H Dome Fiber Splice Closure FOSC 48 cores-02
OPT-F105H Dome Fiber Splice Closure FOSC 48 cores-04
OPT-F105H Dome Fiber Splice Closure FOSC 48 cores-06

OPT-F105H Dome Fiber Splice Closure FOSC 48 cores

Optical splice closures are used to distribute, splice, and store the  outdoor optical cables which enter and exit from the ends of the  closure. There are two connection ways: direct connection and splitting  connection. They are applicable to situations such as overhead, manwell of pipeline, embedded situation etc. Comparing with terminal box,  the closure requires much stricter requirement of seal. Sealing ring and  air valve are required for closure, but that are not necessary for  terminal box.

Share:

  1. The closure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.                                                                                       

  2. The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment. The  waterproof IP68.                    

  3. The closures are applicable to ribbon type optical cable and common optical cable.                                                                       

  4. The splice trays inside the closure are turn-able like booklets, and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40mm.Each optical cable and fiber can be operated individually.            

  5. The closure is of small volume, big capacity and convenient maintenance. The elastic rubber seal rings inside the closure are of good sealing and  sweat-proof performance.                                                                                                                                       

  6. The casing can be opened repeatedly without air leakage. No special tools are required. The operation is easy and simple. The air valve is provided for the closure and used to check the sealing performance.


Specifications

ItemOPT-F105H  FOSC 48 cores dome splice clousure
MaterialPP
Dimensions (H*D),mm300mm*190mm
Max Capacity48 cores
Diameter of Cable,mm3 small round ports(21mm) and 1 large oval port(34mm)
Ports1 in 3 out 
Temperature-40℃~+60℃
Humidity≤95% (at 40℃)
Air Pressure70kPa ~106kPa


Standard Accessories

Tag paper:1pcs 

Sand paper :1pcs 

Silver paper :1pcs 

Cable tie:3mm*10mm 8pcs 

Heat-shrink sleeve:1.0mm*3mm*60mm 48pcs 

Heat shrink tubing:1 bag 

Fiber protective tube:2 pcs 

Cleaning tissue:1pcs 

Pole accessories:1pcs sheet iron and 2 pcs hoop(Optional Accessories

OPT-F105H Dome Fiber Splice Closure FOSC 48 cores

Optional Accessories

OPT-101H Dome Fiber Splice Closure FOSC 48 cores

Inquiry

I accept the privacy policy

You Might Also Like

WhatsApp