Optic Splice Closure

OPT-107H 96-192cores Fiber Optical Vertical Joint Splice Closure Box
OPT-107H 96-192cores Fiber Optical Vertical Joint Splice Closure Box-01
OPT-107H 96-192cores Fiber Optical Vertical Joint Splice Closure Box-02
OPT-107H 96-192cores Fiber Optical Vertical Joint Splice Closure Box-03
OPT-107H 96-192cores Fiber Optical Vertical Joint Splice Closure Box-04
OPT-107H 96-192cores Fiber Optical Vertical Joint Splice Closure Box-05

OPT-107H 96-192cores Fiber Optical Vertical Joint Splice Closure Box

Optical splice closures are used to distribute, splice, and store the  outdoor optical cables which enter and exit from the ends of the  closure. There are two connection ways: direct connection and splitting  connection. They are applicable to situations such as overhead, man-well of pipeline, embedded situation etc. Comparing with terminal box,  the closure requires much stricter requirement of seal. Sealing ring and  air valve are required for closure, but that are not necessary for  terminal box.

Share:

  1. The closure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.                                                                                       

  2. The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment. The  waterproof IP68.                    

  3. The closures are applicable to ribbon type optical cable and common optical cable.                                                                       

  4. The splice trays inside the closure are turn-able like booklets, and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40mm.Each optical cable and fiber can be operated individually.            

  5. The closure is of small volume, big capacity and convenient maintenance. The elastic rubber seal rings inside the closure are of good sealing and  sweat-proof performance.                                                                                                                                       

  6. The casing can be opened repeatedly without air leakage. No special tools are required. The operation is easy and simple. The air valve is provided for the closure and used to check the sealing performance.

Specifications

ItemOPT-F107H  FOSC 96-192 cores dome splice clousure
MaterialPP
Dimensions (H*D),mm470mm*205mm
Max Capacity192 cores
Diameter of Cable,mm4 small round ports(21mm) and 1 large oval port(65mm)
Ports1 in 4 out 
Temperature-40℃~+60℃
Humidity≤95% (at 40℃)
Air Pressure70kPa ~106kPa


Standard Accessories

Tag paper:2pcs 

Sand paper :2pcs 

Silver paper :2pcs 

Sealing rubber strip:1pcs 

Insulating tape:1pcs 

Metal hanger :2pcs 

Grounding wire:1pcs 

Cable tie:3mm*10mm 12pcs 

Fiber protective tube:6pcs 

Heat-shrink sleeve:1.0mm*3mm*60mm 192pcs 

Heat shrink tubing:1 bag 

Pole accessories:1 pcs(Optional Accessories

OPT-107H 96-192cores Fiber Optical Vertical Joint Splice Closure Box

Optional Accessories

OPT-107H 96-192cores Fiber Optical Vertical Joint Splice Closure Box

Inquiry

I accept the privacy policy

You Might Also Like

WhatsApp