optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal.
Share:
The closure casing is made of quality engineering PP+GF plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.
The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment. The protection grade reaches IP68.
The splice trays inside the closure are turn-able like booklets, and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40mm.Each optical cable and fiber can be operated individually.
The closure is of small volume, big capacity and convenient maintenance. The elastic rubber seal rings inside the closure are of good sealing and sweat-proof performance.
The tray is for OPT-F005 Fiber Optic Horizontal Fiber Splice Closure
Specifications
| Material | Streng then ABS+PC |
| Size,mm | 300*200*80 |
| Max Capacity | Splice 48 Fibers(4 trays,12 core/tray |
| Diameter of Cable | A:φ13mm B:φ16mm C:φ20mm |
| Weight,kg | 1.05 |
| Ports | 3 in 3 out |
Standard Accessories
Metal spanner：1pcs
Metal hanger ：2pcs
Sealing rubber strip：1pcs
Insulating tape：1pcs
Plastic plug：9pcs
Rubber waterproof strip：8pcs
Cable tie:3mm*110mm 8pcs
Screw: 10pcs Sand paper :1pcs
Expension bolt: M6 4pcs
Tag paper:1 pcs
Earthing deriving devicepcs：1pcs
Heat-shrink sleeve:1.2mm*60mm 48pcs
Inquiry
You Might Also Like
