Cisco compatible SFP+ transceiver supports up to 20km link lengths over OS2 SMF via an LC simplex connector. This 10G BiDi SFP+ transceiver, featured with data transmission over a single strand of fiber, the one transceiver transmits a 1270nm channel and receives a 1330-nm signal, whereas the other BiDi SFP+ optics transmits at a 1330nm wavelength and receives a 1270nm.
Digital diagnostics can also be used through the I2C interface designated by SFF-8472 to allow access to real-time operating parameters. Each BIDI SFP+ transceiver module is individually tested to be used on a series of switches, routers, servers, network interface cards (NICs) etc. Featuring low power consumption and high speed, this 10G BIDI SFP+ transceiver is ideal for enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc.
Share:
Compatible Cisco,Juniper,brocade, HPE, H3C, Dell,Huawei and ZTE switches.
Built-in Smetch Chip, Max. Power Consumption 1W.
Tested in Targeted Switches for Superior Performance, Quality, and Reliability.
Double Your Bandwidth by Using Only One Fiber for Transmit and Receive.
Carry Information in Both Directions via a Single Strand.
Hot Pluggable SFP+ MSA Compliant.
Digital Optical Monitoring Capability for Strong Diagnostic Capabilities.
Class 1 FDA Laser Safety and RoHS Compliant.
Specification
SFP+ 10GBASE BiDi TX-1270nm/RX-1330nm 20km DOM DDM Simplex LC SMF Optical Transceiver Module Cisco Compatible
| Item | Parameter | Item | Parameter |
| Form Factor | SFP+ | Max Data Rate | 10Gbps |
| Wavelength | 1270nm-TX/1330nm-RX | Max Cable Distance | 20km |
| Connector | Duplex LC | Fiber | 9/125µm |
| Fiber | SMF | DDM/DOM | Supported |
| Transmitter Type | DFB | Receiver Type | PIN |
| TX Power | -3~2dBm | Receiver Sensitivity | <-15dBm |
| Commercial Temperature Range | 0 to 70°C | Protocols | SFP+ MSA Compliant, CPRI, eCPRI |
Factory show
Inquiry
You Might Also Like
