PLC 1×8 Fiber Optical Splitter SC/APC LGX 1260 ~ 1650
Single Mode PLC Splitter is based on a quartz substrate integrated waveguide optical power distribution device, has the advantages of small volume, the working wavelength range, high reliability, good light uniformity etc characteristic, is especially suitable for passive optical network ( EPON, BPON, GPON etc ) connected local and terminal equipment and realize the optical signal devide.Bare PLC splitter is putting PLC splitter chip and input, output optical fiber array in a square metal tube, out with the diameter of 0.9mm or 250um bare fiber ,fiber can be welded, can also be processing various types of optical.
Share:
Low excess loss
Excellent directivity
Good channel-to-channel uniformity
Low PDL
High cost-effectiveness
High environmental and mechanical stability
Applications
Fiber optical communication system
Fiber optical sensors
CATV System
LAN System
WAN System
Specification
PLC 1×8 Fiber Optical Splitter SC/APC LGX 1260 ~ 1650
| Parameters | |
| Operating Wavelengt(nm) | 1260...1650 |
| Insertion Loss (dB) P/S Grade | <10.5 |
| Polarization Dependent Loss(dB) | 0.2-0.4 |
| Directivity (dB) | 55 |
| Return Loss (dB) | 55 |
| Fiber Type | G.657 |
| Connector | SC/APC |
| Length cable | 1м |
| Operating Temperature°С | -20...+50 |
| Storage Temperature,°С | -40...+85 |
XI'AN OPT Communication Co.,Ltd is one of the largest and reliable optical component manufacturers and suppliers with rich experience in China. OPT has invested a large amount of resources in product R&D, quality control, professional technical support in networking solutions, to provide customers with higher-performance and the most cost-effective products. We can customized as your requirement.Also, free sample is also available if necessary.
Inquiry
